qualidade Partes sobressalentes de máquinas de impressão & rolos de máquinas de impressão fabricante

     "Flexo ink" refers to the ink used in the flexographic printing process, which is defined by its method of application (using flexible photopolymer plates and anilox rolls), not by a single type of chemistry.        Water-based ink is a major and very common type of flexo ink, but it's one of several. The main categories are:     So, is flexo ink water-based? If you are looking at a cardboard box, it was almost certainly printed with water-based flexo ink.If you are looking at a plastic soda bottle label or a clear plastic bag, it was likely printed with solvent-based or UV-flexo ink.   Water-based is a hugely important category within flexo printing, but it is not the only kind. The choice depends entirely on the material being printed on and the required properties of the final product. Water-Based Flexo Inks Solvent-Based Flexo Inks UV-Curable Flexo Inks EB (Electron Beam) Curable Inks

   Solvent-Based Flexo Inks    This category uses a wide range of organic solvents, chosen based on the substrate and desired drying speed.    Common Solvents:       How it works: These solvents dissolve the resins that bind the pigment. Heat in the dryer evaporates the solvents, and the resins form a tough, adherent film on the substrate (often non-porous plastic).   You cannot identify a single "solvent for flexo ink." The correct solvent is determined by:     Always refer to the ink manufacturer's technical data sheet (TDS) for the specific solvent recommendations and safety guidelines for a particular ink.   Alcohols: Ethanol, Isopropanol (IPA), n-Propanol. These are fast-evaporating and common for polyolefin films like PP and PE. Esters: Ethyl Acetate, n-Propyl Acetate, Isobutyl Acetate. These offer a medium evaporation rate and are very common. Ketones: Methyl Ethyl Ketone (MEK) (fast), Methyl Isobutyl Ketone (MIBK). These are powerful solvents that provide strong adhesion to difficult films. Glycol Ethers: Used as slower-evoking solvents to keep the ink open on the printing plate and prevent drying. The Substrate: Porous paperboard uses water. Non-porous plastic films often require solvent-based or UV inks. Drying Equipment: A press needs the correct dryer (air/heat for water/solvent, UV lamps for UV) to remove the specific solvent. Environmental Regulations: Solvent-based inks emit VOCs and often require abatement systems. Water-based and UV inks are chosen for their lower environmental impact.

     While the exact recipe is a proprietary secret for each ink manufacturer, all flexo inks are built from a core set of ingredient types. The specific components vary significantly between the main ink systems: water-based, solvent-based, and UV-curable.    The Core Ingredients of Flexographic Inks      1. Pigments Function: Provide the color. These are solid, finely ground particles that impart the visual appearance and opacity of the ink. They do not dissolve but are suspended in the carrier. Examples:   2. Resins (or Binders) Organic Pigments: Phthalocyanine (blue, green), diarylide (yellows, oranges), rhodamine (reds) - used for most process colors. Inorganic Pigments: Titanium dioxide (white), carbon black (black), iron oxides (yellows, reds). Specialty Pigments: Metallics, fluorescents, pearlescents. Function: The "heart" of the ink. After the carrier (water/solvent) evaporates or the ink cures, the resin binds the pigment particles together and forms a continuous film that adheres to the substrate. The choice of resin determines key properties like gloss, abrasion resistance, and flexibility. Examples (by ink type):       Water-based: Shellac, maleic resins, acrylic resins, polyurethane dispersions. Solvent-based: Nitrocellulose, polyamides, acrylics, polyurethanes. UV-curable: Epoxy acrylates, polyester acrylates, urethane acrylates (these are the "oligomers"). 3. Carriers (Vehicles or Solvents)   Function: The liquid component that makes the ink fluid enough for printing. It carries the pigments and resins from the ink pan onto the substrate. It is then removed during drying or curing. Examples (this is the key differentiating factor):     Water-based: Deionized water is the primary carrier, often with a small percentage of a co-solvent like ethanol or isopropanol to control drying and viscosity. Solvent-based: Organic solvents like ethanol, isopropanol, n-propanol, ethyl acetate. UV-curable: There is no carrier. The liquid component is made of reactive monomers that become part of the final cured film, meaning no evaporation occurs (0% VOCs). 4. Additives These are used in small quantities to fine-tune the ink's performance and stability.   Summary and Key Takeaway: Wax Compounds: Added to improve rub and scuff resistance. Defoamers/Anti-foaming Agents: Crucial for water-based inks to prevent foaming in the ink pan and pumps. Surfactants: To control surface tension, improving the ink's ability to wet out and adhere to the substrate. Plasticizers: To increase the flexibility of the dried ink film, preventing it from cracking on flexible materials like film or bags. Biocides: Used in water-based inks to prevent bacterial or fungal growth in the ink system. Photoinitiators: A critical additive only for UV inks. These chemicals absorb UV light energy and kick-start the polymerization reaction that solidifies the ink. The ingredients in flexographic ink work together to create a stable liquid that can be metered, transferred, and then solidified onto a substrate. The choice of ingredients depends on: The Substrate: Paper absorbs water-based inks, while non-porous plastics like PET often require solvent-based or UV inks for adhesion. The End-Use: A food package requires FDA-compliant ingredients. A label that will be scratched needs durable resins and wax additives. Always consult the manufacturer's Safety Data Sheet (SDS) and Technical Data Sheet (TDS) for the exact ingredients, hazards, and performance characteristics of a specific ink. Environmental & Safety Regulations: The drive towards lower VOCs favors water-based and UV inks over traditional solvent-based formulas.     Always consult the manufacturer's Safety Data Sheet (SDS) and Technical Data Sheet (TDS) for the exact ingredients, hazards, and performance characteristics of a specific ink.